|
Name: BX Ring Joint Gasket (ZT-G804)
The type BX energized ring type joints, manufactured in accordance with API 6A, are designed for use on pressurized systems up to 20,000 psi.When correctly fitted, the type BX gasket allows virtual face to face contact of the flange faces which means that the gasket in fully trapped on both the inner and outer diameters.All BX gasket incorporate a pressure balance hole to ensure equalization of pressure which may be trapped in the grooves.
>> more detail
|
| |
| |
|
Name: RX Ring Joint Gasket (ZT-G803)
The style RX is an adaptation of the standard style R which energizes on assembly. The RX is designed to fit the same groove design as a standard style R, making the joints interchangeable.Consideration should be given to the difference in finished make-up distance.The modified design uses an energizing on assembly effect with improves the efficiency of the seal.
>> more detail
|
| |
| |
|
Name: Octagonal Ring Joint Gasket (ZT-G802)
The ring type joint was initially developed for high pressure and temperature applications found in the petroleum industry and is primarily used in the oil field on drilling and completion equipments. However, today this product range can also be found on valves and pipework assemblies, along with some high integrity pressure vessel joints.
>> more detail
|
| |
| |
|
Name: Oval Ring Joint Gasket (ZT-G801)
The ring type joint was initially developed for high pressure and temperature applications found in the petroleum
industry and is primarily used in the oil field on drilling and completion equipments. However, today this product
range can also be found on valves and pipework assemblies, along with some high integrity pressure vessel joints.
>> more detail
|
| |
| |
|
Name: Metal Jacketed Gasket (ZT-G701)
Metallic gaskets can come in different styles like; double jacket, single jacket, or solid metal. Soft compressible filler material can be flexible graphite, PTFE, or non-asbestos compressed sheet type. The design of a metal jacketed gasket also may require different shapes and the styles mentioned above can be made to a variety. zinotak jacketed gaskets are normally manufactured with a high temperature filler. The standard filler is normally sufficient for applications up to 900º F. Other soft fillers are available for higher temperatures or special applications. The choice of the metal used for the jacketed part of the gasket would depend upon the corrosive conditions being encountered.
>> more detail
|
| |
| |
|
Name: Corrugated Metal Gasket (ZT-G601)
The corrugated metal gaskets have been proven to be both reliable and cost effective for the
application on flanges and heads where boat loading is sufficient.
Corrugated metal is covered with graphite, ceramic or PTFE layer. An additional finishing layer
is applied depending on the requirements of the medium to be sealed. The gaskets with soft
layer on both sides are used in low pressure applications in large diameter flue gas ducts at
high temperatures
>> more detail
|
| |
| |
|
Name: Abnormity Graphite Packing Ring (ZT-G203)
Graphite packing ring with metal is pressed by pure graphite tape . In general ,a square cross-section can also be made, If the customer required, we also can be made O-shaped,conical
shaped and V-shaped. Conical shaped and V-shaped is more suitable for high parts of seal
>> more detail
|
| |
| |
|
Name: Graphite Packing Ring With Wire Mesh (ZT-G202)
Graphite packing ring with metal is pressed by pure graphite tape and 304ss tape/ 304ss wire /
nickel foil . It mainly can improve stress resistance. In order to prevent the filler oxidized slowly,
we always design the packing ring is with stainless steel tap and bottom graphite ring.Inhibition
type graphite packing ring is pressed by graphite sheet with low sulfur and zinc powder, which
can be effectively prevent the fill material sulfur corrosion stem. In general ,a square cross-section can also be made, If the customer required, we also can be made O-shaped,conical
shaped and V-shaped. Conical shaped and V-shaped is more suitable for high parts of seal.
>> more detail
|
| |
| |
|
|
|
|
Do you want to know more about Zinotak?
